Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kamikawa, Yutaka; Suzuki, Makoto; Agake, Toshiki; Murakami, Takahiko; Morita, Yusuke; Shiina, Hidenori; Fukushima, Manabu; Hirane, Nobuhiko; Ouchi, Yasuhiro
JAEA-Technology 2023-030, 57 Pages, 2024/03
JAEA-Technology-2023-030.pdf:1.93MB
Owing to the publication of the latest data about aircraft crashes by Nuclear Regulation Authority (NRA), it was necessary to re-evaluate the probabilities of aircraft crashes for Nuclear Science Research Institute (NSRI). By using of the assessment method provided in "Regulatory Guide of the Assessment Standard for Probability of Airplane Crash on a Nuclear Power Reactor Facility", we re-evaluated the probabilities of aircraft crashes against the nuclear facilities in NSRI. As a result of the evaluations, the sum of the probabilities of aircraft crashes against Waste Treatment Facilities (maximum probability among all nuclear facilities in NSRI) is 5.68
10
(times/(reactor 
year)) which is lower than 10
(times/(reactor year)) that is the assessment criterion whether aircraft crashes is considered to be "anticipated external human induced events" in design basis or not.
Togawa, Orihiko; Okuno, Hiroshi
JAEA-Review 2023-043, 94 Pages, 2024/03
JAEA-Review-2023-043.pdf:1.53MB
In order to translate nuclear disaster prevention documents written in Japanese into English, the Basic Act on Disaster Management, the Act on Special Measures Concerning Nuclear Emergency Preparedness, and the Convention on Nuclear Safety were surveyed for corresponding terms in Japanese and English. The survey results were integrated and unified English translations were selected. As a result, a Japanese-English correspondence table of technical terms in the field of nuclear disaster prevention was prepared and proposed.
Fukahori, Tokio
Kaku Deta Nyusu (Internet), (137), p.1 - 10, 2024/02
At the request of the EC/Joint Research Center, the author attended on an EU-sponsored side event "Providing the best nuclear data for tomorrow's nuclear solutions: challenges and opportunities" held simultaneously at the IAEA 67th General Conference as a panelist. Presented were the prospects for nuclear data activities in Japan and discussed the sustainability and revitalization of nuclear data activities. In addition, based on the roundtable discussion at this side event, the Nuclear Data Section held a meeting consisting mainly of panelists to consider future responses. In this article, I would like to report on the side event and subsequent follow-up meetings and discuss the background of these meetings.
Shimada, Taro; Sasagawa, Tsuyoshi; Miwa, Kazuji; Takai, Shizuka; Takeda, Seiji
Proceedings of International Conference on Environmental Remediation and Radioactive Waste Management (ICEM2023) (Internet), 7 Pages, 2023/10
Nuclear regulatory inspection should be performed on the basis of the risk information during the decommissioning phase of the nuclear power plant. However, it is difficult because the methodology for quantitatively assessing the radiation exposure risk during decommissioning activities has not been established. Therefore, a decommissioning risk assessment code, DecAssess-R, has been developed based on the decommissioning safety assessment code, DecAssess, which creates event trees from initiating events and evaluates the radiation risk resulting from public exposure dose for each accident sequence. The assessment took into account that mobile radioactive inventories that can be easily dispersed in the work area, such as radioactive dust accumulated in HEPA filters attached to a contamination control enclosure, will fluctuate with the progress of the decommissioning work. Initiating events were selected based on the investigation of accidents and malfunctions during dismantling, disassembly, and component replacement activities around the world, and event trees were created from the initiating events to indicate the progress scenario. The frequencies of occurrence were determined with reference to general industry data in addition to the above accidents and malfunctions, and the probabilities of event progression were determined with reference to failure data during the operation phase. The exposure risks during dismantling of components in the reference BWR were evaluated. As a result, the public exposure dose was maximum in case of fire during dismantling of reactor internals and fire spread to combustibles and filters, including radioactivity temporarily stored in the work area. The exposure risk was also maximum because the probability of occurrence of this accident sequence was greater than that of other scenarios.
Kubo, Kotaro; Zheng, X.; Tanaka, Yoichi; Tamaki, Hitoshi; Sugiyama, Tomoyuki; Jang, S.*; Takata, Takashi*; Yamaguchi, Akira*
Proceedings of the Institution of Mechanical Engineers, Part O; Journal of Risk and Reliability, 237(5), p.947 - 957, 2023/10
Times Cited Count：4 Percentile：69.72(Engineering, Multidisciplinary)Probabilistic risk assessment (PRA) is a method used to assess the risks associated with large and complex systems. However, the timing at which nuclear power plant structures, systems, and components are damaged is difficult to estimate if the risk of an external event is evaluated using conventional PRA based on event trees and fault trees. A methodology coupling thermal-hydraulic analysis with external event simulations using Risk Assessment with Plant Interactive Dynamics (RAPID) is therefore proposed to overcome this limitation. A flood propagation model based on Bernoulli's theorem was applied to represent internal flooding in the turbine building of the pressurized water reactor. Uncertainties were also taken into account, including the flow rate of the floodwater source and the failure criteria for the mitigation systems. The simulated recovery actions included the operator isolating the floodwater source and using a drainage pump; these actions were modeled using several simplifications. Overall, the results indicate that combining isolation and drainage can reduce the conditional core damage probability upon the occurrence of flooding by approximately 90%.
Nemoto, Takahiro; Arakawa, Ryoki; Kawakami, Satoru; Nagasumi, Satoru; Yokoyama, Keisuke; Watanabe, Masashi; Onishi, Takashi; Kawamoto, Taiki; Furusawa, Takayuki; Inoi, Hiroyuki; et al.
JAEA-Technology 2023-005, 33 Pages, 2023/05
JAEA-Technology-2023-005.pdf:5.25MB
During shut down of the HTTR (High Temperature engineering Test Reactor) RS-14 cycle, an increasing trend of filter differential pressure for the helium gas circulator was observed. In order to investigate this phenomenon, the blower of the primary helium purification system was disassembled and inspected. As a result, it is clear that the silicon oil mist entered into the primary coolant due to the deterioration of the charcoal filter performance. The replacement and further investigation of the filter are planning to prevent the reoccurrence of the same phenomenon in the future.
Johansen, M. P.*; Child, D. P.*; Collins, R.*; Cook, M.*; Davis, J.*; Hotchkis, M. A. C.*; Howard, D. L.*; Howell, N.*; Ikeda, Atsushi; Young, E.*
Science of the Total Environment, 842, p.156755_1 - 156755_11, 2022/10
Times Cited Count：4 Percentile：53.82(Environmental Sciences)Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*
JAEA-Review 2022-010, 155 Pages, 2022/06
JAEA-Review-2022-010.pdf:9.78MB
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2020. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of the technology for preventing radioactive particles' dispersion during the fuel debris retrieval" conducted from FY2018 to FY2021 (this contract was extended to FY2021). Since the final year of this proposal was FY2021, the results for four fiscal years were summarized. The present study aims to clarify the behavior of microparticles in gas and liquid phases in order to steadily confine radioactive microparticles during fuel debris retrieval in Fukushima Daiichi Nuclear Power Station, TEPCO. As measures to prevent dispersion of microparticles, (1) a method to suppress the dispersion with minimum amount of water utilizing water spray etc., and (2) a method to suppress the dispersion by solidifying ...
Kubo, Kotaro; Zheng, X.; Tanaka, Yoichi; Tamaki, Hitoshi; Sugiyama, Tomoyuki; Jang, S.*; Takata, Takashi*; Yamaguchi, Akira*
Proceedings of 30th European Safety and Reliability Conference and 15th Probabilistic Safety Assessment and Management Conference (ESREL 2020 and PSAM-15) (Internet), p.2279 - 2286, 2020/11
Probabilistic risk assessment (PRA) is one of the methods used to assess the risks associated with large and complex systems. When the risk of an external event is evaluated using conventional PRA, a particular limitation is the difficulty in considering the timing at which nuclear power plant structures, systems, and components fail. To overcome this limitation, we coupled thermal-hydraulic and external-event simulations using Risk Assessment with Plant Interactive Dynamics (RAPID). Internal flooding was chosen as the representative external event, and a pressurized water reactor plant model was used. Equations based on Bernoulli's theorem were applied to flooding propagation in the turbine building. In the analysis, uncertainties were taken into account, including the flow rate of the flood water source and the failure criteria for the mitigation systems. In terms of recovery action, isolation of the flood water source by the operator and drainage using a pump were modeled based on several assumptions. The results indicate that the isolation action became more effective when combined with drainage.
Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*
JAEA-Review 2019-037, 90 Pages, 2020/03
JAEA-Review-2019-037.pdf:7.0MB
JAEA/CLADS, had been conducting the Center of World Intelligence Project for Nuclear Science/Technology and Human Resource Development (hereafter referred to "the Project") in FY2018. The Project aims to contribute to solving problems in nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of Technology to Prevent Scattering of Radioactive Materials in Fuel Debris Retrieval". The objective of the present study is to clarify the behavior of microparticles in gas and liquid phases in order to steadily confine radioactive microparticles at the time of debris retrieval in Fukushima Daiichi Nuclear Power Station. In addition, as measures to prevent scattering, we will evaluate and develop methods by experiments and simulation as to; (1) a method to suppress the scattering with minimum amount of water utilizing water spray etc., and (2) a method to suppress the scattering by solidifying fuel debris.
Takahashi, Sentaro*; Kawashima, Shigeto*; Hidaka, Akihide; Tanaka, Sota*; Takahashi, Tomoyuki*
Nuclear Technology, 205(5), p.646 - 654, 2019/05
Times Cited Count：4 Percentile：41.24(Nuclear Science & Technology)Takai, Shizuka; Takayama, Hideki*; Takeda, Seiji
JAEA-Data/Code 2016-020, 40 Pages, 2017/03
JAEA-Data-Code-2016-020.pdf:2.42MB
In this report, another group of scenarios for occurrence of earthquake at construction stage, operation stage and closure stage of disposal facility was presented. At first, we compiled information about damage cases of tunnel by earthquake and analyzed conditions for occurrence of damage. Base on this result and the previous report, information of influence of the accidents and human factors on safety functions and information of FEP about THMC variation, we specified events to be considered, which occur by earthquake and influence engineering barriers, natural barriers and long-term safety after closure stage of disposal facility. We compiled influence of the events on safety functions after closure stage of disposal and showed the chains of the influence on long-term safety as scenarios. These results were integrated as a database that could support development of scenarios caused by application of engineering technologies to geological disposal.
Okano, Yasushi; Yamano, Hidemasa
Proceedings of 10th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-10) (USB Flash Drive), 9 Pages, 2016/11
This paper deals with an event sequence by forest fire heat effect on a decay heat removal function of a sodium-cooled fast reactor. Related to the potential vulnerability, an event scenario was developed using conservative assumptions. An event tree was developed with an initiating event of the loss of off-site power, and the headings are related to "external diesel fuel tanks", "emergency diesel generator and its auxiliary system", "alternative cooling system and its power source", and "decay heat air cooler". A failure probability on each heading was given from a fragility curve as a function of reaction intensity or by assumptions based on conservative models. A core damage frequency, under the conditional of the loss of off-site power, was conservatively evaluated around 10/year. A key heading in the event tree with large effect on the frequency is the intactness of the external diesel fuel tanks.
Itoi, Tatsuya*; Nakamura, Hideo; Nakanishi, Nobuhiro*
Nihon Genshiryoku Gakkai-Shi ATOMO
, 58(5), p.318 - 323, 2016/05
no abstracts in English
Okano, Fuminori; Ikeda, Yoshitaka; Sakasai, Akira; Hanada, Masaya; JT-60 Team
Purazuma, Kaku Yugo Gakkai-Shi, 90(10), p.630 - 639, 2014/10
JT-60 tokamak device, as a largest nuclear fusion device in the world, started the experiments since 1985 and had accomplished the research and development of plasma performance toward the DEMO. The project has successfully completed it operation in August 2008 with many results such as accomplishment of break-even plasma condition in 1996. This disassembly was required for JT-60SA project, which is the Satellite Tokamak project under Japan-EU international corroboration to modify the JT-60 to the superconducting tokamak. This work was the first experience of disassembling a large radioactive fusion device based on Radiation Hazard Prevention Act in Japan. This report presents the outline of disassembly of JT-60 tokamak device.
Mizuta, Eiichi*; Kuboyama, Satoshi*; Abe, Hiroshi; Iwata, Yoshiyuki*; Tamura, Takashi*
IEEE Transactions on Nuclear Science, 61(4), p.1924 - 1928, 2014/08
Times Cited Count：94 Percentile：99.19(Engineering, Electrical & Electronic)Minehara, Eisuke
Nuclear Instruments and Methods in Physics Research A, 557(1), p.16 - 22, 2006/02
Times Cited Count：11 Percentile：60.27(Instruments & Instrumentation)The JAERI FEL facility at Tokai, Ibaraki, Japan has been well known one of the two existing and operating superconducting energy recovery linacs together with one more of JLAB (Jefferson national accelerator facility) FEL facility at Newport News, Virginia, U.S.A. We have independently and successfully developed one of the most advanced and newest accelerator technologies named "superconducting energy recovery linacs (ERLs)" and the application technologies using ERLs in future. We plan to report the current high power FEL upgrade program research, stress corrosion cracking prevention technology research, large current and high brightness photoelectron gun research of negative-electron affinity (NEA) photocathode and NEA electron-excitation cathode as the most important elemental technology in realizing many powerful ERLs.
Lukash, V.*; Sugihara, Masayoshi; Gribov, Y.*; Fujieda, Hirobumi*
Plasma Physics and Controlled Fusion, 47(12), p.2077 - 2086, 2005/12
Times Cited Count：9 Percentile：31.24(Physics, Fluids & Plasmas)Vertical directions of plasma movement after the thermal quench (TQ) of major disruptions in ITER are investigated using the predictive mode of the DINA code. Three dominant parameters in determining the direction of plasma movement are identified; (1) the rate of plasma current quench, (2) change of the internal plasma inductance li associated with the TQ and (3) the initial vertical position of plasma column before the TQ. It is shown that the reference ITER plasma moves upward after the TQ, if the current quench rate is higher than 200kA/ms and the drop of li does not exceed 0.2 for the present reference initial vertical position (55.5 cm above the center of machine).
Minehara, Eisuke; Hajima, Ryoichi; Iijima, Hokuto; Kikuzawa, Nobuhiro; Nagai, Ryoji; Nishimori, Nobuyuki; Nishitani, Tomohiro; Sawamura, Masaru; Yamauchi, Toshihiko
Proceedings of 27th International Free Electron Laser Conference (FEL 2005) (CD-ROM), p.305 - 308, 2005/00
The JAERI high power ERL-FEL has been extended to the more powerful and efficient free-electron laser (FEL) than 10kW for nuclear energy industries, and other heavy industries like defense, shipbuilding, chemical industries, environmental sciences, space-debris, and power beaming and so on. In order to realize such a tunable, highly-efficient, high average power, high peak power and ultra-short pulse FEL, we need the efficient and powerful FEL driven by the JAERI compact, stand-alone and zero boil-off super-conducting RF linac with an energy-recovery geometry. Our discussions on the ERL-FEL will cover the current status of the 10kW upgrading and its applications of non-thermal peeling, cutting, and drilling to decommission the nuclear power plants, and to demonstrate successfully the proof of principle prevention of cold-worked stress-corrosion cracking failures in nuclear power reactors under routine operation using small cubic low-Carbon stainless steel samples.
Tamaki, Hitoshi; Yoshida, Kazuo; Watanabe, Norio; Muramatsu, Ken
Proceedings of International Topical Meeting on Probabilistic Safety Analysis (PSA '05) (CD-ROM), 11 Pages, 2005/00
A probabilistic safety assessment (PSA) procedure for Mixed Oxide (MOX) fuel fabrication facilities is being developed applicable to nuclear facilities at Japan Atomic Energy Research Institute (JAERI). As part of the PSA procedure, the approach to hazard analysis was established, which consists of two analysis steps: Functional Failure Modes and Effects Analysis (Functional FMEA) and Risk Matrix Analysis. In the Functional FMEA, a variety of functions of equipment composing the facility are analyzed to identify potential abnormal events exhaustively. In the second step, these potential events are screened to select abnormal events as candidate events to be analyzed for frequency and consequence by using two-dimensional matrix based on the rough estimation of likelihood and maximum unmitigated release of radioactive material. The applicability of the hazard analysis approach established was demonstrated through the trial application of the PSA procedure being developed to model plant of MOX fuel fabrication facility.
